Linux

Linux: How to rescan for new LUNs on a Emulex FC Controller

Leave a comment

Hi,

rescan for new LUNs on a Emulex Fibre Channel Controller:

List all HBAs

 root@debdev # ls -l /sys/class/fc_host
lrwxrwxrwx 1 root root 0 Oct 24 12:22 host10 -> ../
lrwxrwxrwx 1 root root 0 Oct 24 12:22 host11 -> ../
lrwxrwxrwx 1 root root 0 Oct 24 12:22 host7 -> ../.
lrwxrwxrwx 1 root root 0 Oct 24 12:22 host9 -> ../.


Start a rescan for new LUNs on a HBA(means real FC Ports not Adapters)

 root@debdev # echo "1" > /sys/class/fc_host/host10/issue_lip
 root@debdev # echo "- - -" > "/sys/class/scsi_host/host10/scan"

Get some fibre channel information
The fabric a HBA is connected to

 root@debdev # cat /sys/class/fc_host/host10/fabric_name
0x100056eb2a367958

The WWNN (World wide node name)

 root@debdev # cat /sys/class/fc_host/host10/node_name
0x20000060ca3badb8

The WWPN (World wide port name)

 root@debdev # cat /sys/class/fc_host/host10/port_name
0x10000060ca3badb8

Port speed

 root@debdev # cat /sys/class/fc_host/host10/speed
8 Gbit

Current Porttype

 root@debdev # cat /sys/class/fc_host/host10/port_type
NPort (fabric via point-to-point)

Port State

 root@debdev # cat /sys/class/fc_host/host10/port_state
Online

You can also use the systool to query the sys filesystem

 root@debdev # systool -c fc_host -v

To list the discovered WWNN and WWPNs use

 root@debdev # systool -c fc_transport -v

Michael

Leave a Reply Cancel reply