Tag Archives: Tasmota

Tasmota: My FAQs

Hi,

these are my FAQs for Tasmota:
Continue reading Tasmota: My FAQs

Advertisment to support michlstechblog.info

Tasmota: Setup a PWM with 1024Bit

Hi,

short post today. It shows howto configure a GPIO Pin as PWM with a width of 1024Bits. Note the restrictions when using IO Ports.

Configure GPIO 14 to PWM 1.

Continue reading Tasmota: Setup a PWM with 1024Bit

Tasmota: Connect a lcdproc/LCDd compatible HD44780 i2c Display

Hi,

I already owned a HD44780 I2C Display, which is compatible to LCDd/lcdproc, and want to get this running with Tasmota.

Problem: The LCD 2004 or LCD 1602 Display, for which the Tasmota LCD driver was written, uses a different wiring between the i2c expander (PCF8574) and the HD44780 Display.
Continue reading Tasmota: Connect a lcdproc/LCDd compatible HD44780 i2c Display

Tasmota: Build your own tasmota firmware

Hi,

if you want to use Conditional Rules in tasmota you have to built your own firmware, because Conditional Rules are not included in the precomplied binaries.

Continue reading Tasmota: Build your own tasmota firmware

Sonoff TH10/16: Flashing Tasmota and setup temperature measurement

these steps describes how to install Tasmota on Sonoff Smart Home WIFI/WLAN relay.

First you need a the flash tool esptool. Simplest way is to install the python module. This is the same way on linux and windows
Continue reading Sonoff TH10/16: Flashing Tasmota and setup temperature measurement