Category Archives: Electronic

Sonoff TH10/16: Flashing Tasmota and setup temperature measurement

these steps describes how to install Tasmota on Sonoff Smart Home WIFI/WLAN relay.

First you need a the flash tool esptool. Simplest way is to install the python module. This is the same way on linux and windows
Continue reading Sonoff TH10/16: Flashing Tasmota and setup temperature measurement

Advertisment to support michlstechblog.info

Tasmota: Flashing and setup a Shelly 2.5



Hi,

these steps describes how to install Tasmota on Shelly Smart Home WIFI/WLAN relay.

First you need a the flash tool esptool. Simplest way is to install the python module. This is the same way on linux and windows
Continue reading Tasmota: Flashing and setup a Shelly 2.5

EIB/KNX: KNXNet/IP Gateway with calimero server on Raspberry Pi/Orange Pi PC

Hi,

as an alternative to knxd the calimero project also supplies an KNXnet/IP server.

Continue reading EIB/KNX: KNXNet/IP Gateway with calimero server on Raspberry Pi/Orange Pi PC

OrangePi: High CPU Temperature or [ARISC ERROR]’s in kernel log

Hi,

if your Orange Pi device has one of the following issues:
Continue reading OrangePi: High CPU Temperature or [ARISC ERROR]’s in kernel log

Eagle: Approach to print a layout repeatedly to a page

Hi,

Eagle does not offer a possibility to print a PCB layout repeatedly to a page. Also the copy & paste approach is limited to the max. board size and therefore depending on the license.

A possible way is to export the layout of the PCB to an .png file, import the image to GIMP and duplicate them.
Continue reading Eagle: Approach to print a layout repeatedly to a page